Specially engineered to power and protect typical industrial equipments such as motors, motor speed drivers, lamps, non linear loads, welding equipments, power supplies, MASTERYS IP+ is also perfectly able to supply control equipments like programmable controllers, sensors and measurement apparatus and integrates perfectly into the most demanding industrial environments.
Advantages
A high-quality power supply
- High precision of the output voltage, whatever the type of load supplied
- Possibility of supplying loads with a power factor of up to 0.9 leading, without de-rating the active power
- High short-circuit current delivered by the UPS, simplifying the protection needed to ensure selectivity downstream
Protection against severe environmental conditions
- MASTERYS IP+ is integrated in a robust heavy steel frame enclosure
- Standard protection degree is IP31 (protection against foreign solid objects of 2,5 mm diameter or greater, and protection against vertically falling water drops)
- This protection level can be increased for harsh environments up to IP52 -optional- (full protection from dust with easy replaceable air filters, and protection against water sprayed at an angle up to 15 from vertical)
- Furthermore, the electrical circuit boards can be coated on both sides to protect them from corrosive air particles (option)
- Floor anchoring to prevent tilting
Galvanic isolation
- Compact solution with insulation transformer, MASTERYS IP+ provides complete galvanic isolation between the upstream and downstream circuits
- Therefore the equipment adapts perfectly to all upstream and downstream neutral point connections
Easy integration into industrial network
- Optimization the sizing of input protections, cables, Generator sets and transformers thanks to IGBT rectifier (high input power factor > 0,99 and low input current harmonic distortion <3%)
- Fully compatible with Generator sets
- Wide input voltage tolerance from -40% up to +20% of nominal voltage to withstand the large voltage transients that can frequently happen on mains in the industrial environment
- Double immunity comparing to the requirement of UPS international standard IEC 62040-2, to further increase protection against electromagnetic disturbance
- Compatible with Open vented Lead Acid, Valve Regulated Lead Acid (VRLA) and Nickel Cadmium Batteries
- True frontal access for input/output cabling, spares replacement and maintenance
Scalability
- MASTERYS IP+ offers Scalable power and high availability (using redundancy) with the facility to parallel up to 6 units
- Preventive maintenance without process interruption
Cost reductions and energy environmental considerations
- The high efficiency of the UPS reduces energy loss and the systems need for extensive air conditioning systems
Communicating equipment
- MASTERYS IP+ is equipped with user friendly multilingual interface with graphical display
- It provides flexible communication possibilities such as programmable volt-free contacts, enabling the remote reporting of status or alarm information
- Another standard feature is a RS232 and RS485 serial link with JBUS/MODBUS protocols, which makes it possible to exchange the same information in addition to measurements taken by the UPS
- Profibus and Devicenet protocols are also available (option)
A reassuring technical presence
- Ensured by our inspection and maintenance service, which is strategically located throughout the country
- Our support staff is ready to advise and assist you with the activation, preventive maintenance and corrective maintenance of our systems
Dual battery: The batteries are split into two separate, independent assemblies (separate chargers and protection). If there is a fault with one of the batteries, the back-up time provided by the other unit remains available and continues to supply power to your equipment.
Technical data
kVA | 10 | 15 | 20 | 30 | 40 | 60 | 80 |
kW - Input/output: 3/1 | 9 | 13.5 | 18 | 27 | 32 | 48 | - |
kW - Input/output: 3/3 | 9 | 13.5 | 18 | 27 | 36 | 48 | 64 |
Parallel configuration (1) | up to 6 units |
INPUT
Nominal voltage | (3ph + N) 400 V ± 20 % (3) (up to -40 % at 50 % Pn) | ||||||
Input frequency | 50 / 60 Hz ± 10 % | ||||||
Power factor /THDI (2) | 0.99 /< 3% |
OUTPUT
Output voltage | if 1ph + N 230 V ± 1 % (can be configured 220 / 240 V) if 3ph + N 400 V ± 1 % (380 / 415 V configurable)(3) | ||||||
Output frequency | 50 / 60 Hz ± 2 % (can be configured from 1 % to 8 % with generating set) | ||||||
Automatic bypass | Nominal output voltage ± 15 % (configurable from 10 % to 20 % with generating set) | ||||||
Overload | 125% for 10', 150% for 60" | ||||||
Crest factor | 3:1 (complying with IEC 62040-3) | ||||||
PF acceptable without de-rating | up to 0.9 lead. (up to 0.7 lead for 10 min) |
EFFICIENCY
Online mode @ 50 % of load | 96% | ||||||
Online mode @ 75 % of load | 96% | ||||||
Online mode @ 100 % of load | 95.5% | ||||||
Efficiency in ECO-MODE | up to 98 % |
ENVIRONMENT
Operating ambient temperature | 0 °C to +40 °C (15 °C to 25 °C for best battery life) | ||||||
Storage temperature range | -5 to +45 °C (15 °C to 25 °C for best battery life) | ||||||
Relative humidity | 0 % - 95 % without condensation | ||||||
Maximum altitude | 1000 m without de-rating (maximum 3000 m) | ||||||
Noise level (ISO 3746) | < 52 dB | < 55 dB | < 65 dB |
WEIGHT (kg)
Input/output: 3/1 | 230 | 250 | 270 | 330 | 490 | 540 | - |
Input/output: 3/3 | 230 | 250 | 270 | 320 | 370 | 500 | 550 |
DIMENSIONS (W x D x H) (mm)
Input/output: 3/1 | 600 x 800 x 1400 | 1000 x 835 x 1400 | |||||
Input/output: 3/3 | 600 x 800 x 1400 | 1000 x 835 x 1400 |
STANDARDS
Safety | EN 62040-1 (TÜV SÜD certified), EN 60950-1 | ||||||
Performance & topology | EN 62040-3 [VFI-SS-111] | ||||||
EMC standard | EN 62040-2 (2nd Edition) | ||||||
Product certification | CE | ||||||
IP rating | IP 31 (according to IEC 60529) |
(1) with transformer on input/bypass side
(2) for source THDV <2% and nominal load
(3) Three-phase 220 - 230 - 240V from 15 to 40 kVA on demand